The machine can be used alongside any laminator or encapsulator, according to Autobond managing director John Gilmore.
He said: "The potential to use Autobond technology beyond the traditional concept of putting a film over printed stock in order to improve its appearance and durability grows constantly."
The cutting blade on the 60m/min CC 105 can cut material as thick as 500 microns and during lamination the grip edge of each sheet is under-lapped by 3mm.
It also features a laser sensor to detect the double thickness of the 3mm under-lap, stopping the web ‘on a dime’, as the servo-driven flying knife cuts through the film.
The CC 105 uses an arrowhead blade, which can cut polypropylene, nylon, and polyester where sheets have been under-lapped.
Autobond adds CC 105 to finishing options
UK finishing kit manufacturer Autobond has continued its move into new areas with the launch of the CC 105 cross-cutter.
